Rolling Shutter Tubular Motor 45mm 50Nm UAE

The Rolling Shutter Tubular Motor 45mm 50Nm is a powerful and compact electric motor designed for automatic rolling shutters, roller blinds, window shutters and motorised shading systems. With a 45mm motor diameter and rated torque of 50Nm, it provides reliable operation for compatible residential and commercial shutter applications.

The motor operates on 230V AC / 50Hz and provides a rated speed of 12rpm. With 225W rated power, 1.00A current, IP44 protection and Class F insulation, it provides dependable performance when correctly matched to the shutter weight and roller tube configuration.

Its tubular construction allows the motor to be installed inside a compatible roller tube, creating a clean, compact and space-saving automatic shutter system.

Key Features

• 45mm rolling shutter tubular motor
• 50Nm rated torque
• 230V AC operation
• 50Hz rated frequency
• 225W rated power input
• 1.00A rated current
• 12rpm rated speed
• S2 4-minute running time
• IP44 protection rating
• Class F insulation
• Compact internal tube installation
• Suitable for rolling shutters
• Suitable for roller blinds
• Suitable for window shutters
• Residential and commercial applications

Technical Specifications

45mm Rolling Shutter Tubular Motor

The motor features a compact 45mm tubular design for installation inside compatible rolling shutter and roller blind tubes.

This internal installation keeps the motor largely concealed inside the roller assembly and provides a clean and space-saving automation solution.

50Nm Tubular Motor

With a rated torque of 50Nm, this tubular motor provides greater lifting force than lower-torque 45mm models and is suitable for compatible medium-size rolling shutters and blinds.

Motor selection should always be based on the actual shutter weight, width, height, roller tube diameter and complete mechanical configuration.

230V AC Tubular Motor

The tubular motor operates from a 230V AC / 50Hz electrical supply.

Professional electrical installation is recommended to ensure correct wiring, protection, limit adjustment and control connections.

225W Rolling Shutter Motor

The motor has a rated power input of 225W and rated current of approximately 1.00A.

The electrical supply and control equipment should be correctly selected according to the motor specifications.

12rpm Tubular Shutter Motor

The 45mm 50Nm motor provides a rated rotational speed of 12rpm for smooth opening and closing of compatible shutters.

Actual shutter movement speed will depend on the roller tube diameter and complete shutter configuration.

S2 4-Minute Running Time

The motor has an S2 4-minute duty rating, meaning it is designed for short-duration shutter operation rather than continuous running.

If repeated operation activates the motor's thermal protection, the motor should be allowed sufficient time to cool before further operation.

IP44 Tubular Motor

The tubular motor has an IP44 protection rating. The complete installation should still provide appropriate protection for the motor, wiring and electrical connections.

Class F Motor Insulation

The motor uses Class F insulation for suitable thermal performance under its specified operating conditions.

Tubular Motor for Rolling Shutters

The 45mm 50Nm motor is suitable for compatible automatic rolling shutter systems where the shutter load and tube configuration are within the motor's operating requirements.

The shutter weight should be calculated before installation to ensure that 50Nm provides sufficient torque.

Tubular Motor for Roller Blinds

The motor can also be used for compatible motorised roller blinds requiring higher torque than smaller tubular motor models.

Its internal installation provides a neat solution for residential, office and commercial blind automation.

Tubular Motor for Window Shutters

The 50Nm tubular motor can be installed in compatible motorised window shutter systems where the required torque and tube dimensions match the motor.

Rolling Shutter Push Button Control

The motor can be operated using a compatible UP / STOP / DOWN push button or rolling shutter control switch.

This provides convenient local control for opening, stopping and closing the motorised shutter.

Rolling Shutter Remote Control

A compatible rolling shutter receiver or motor controller can be added to provide wireless remote-control operation.

Users can then open, stop and close the shutter using compatible remote transmitters.

Smart Rolling Shutter Control

The tubular motor can also be integrated with a compatible smart shutter controller where remote or smart operation is required.

The controller must be electrically compatible with the motor's 230V directional wiring configuration.

45mm 20Nm vs 45mm 50Nm Tubular Motor

The 45mm 20Nm and 45mm 50Nm motors share the same basic motor diameter but are designed for different load requirements.

The 50Nm version provides significantly higher torque and should be selected when the calculated shutter load requires more lifting force. Motor selection should always be based on the actual shutter dimensions and weight.

45mm 50Nm Tubular Motor Applications

• Automatic rolling shutters
• Roller blinds
• Window shutters
• Motorised blinds
• Residential shutters
• Office blinds and shutters
• Commercial roller shutters
• Shop window shutters
• Motorised shade systems
• Replacement tubular motors

Professional Tubular Motor Installation

Professional installation is recommended to ensure correct motor sizing, roller tube compatibility, adapter selection, electrical wiring and limit adjustment.

Before selecting the 45mm 50Nm motor, the shutter weight and roller tube dimensions should be checked to confirm compatibility.

Rolling Shutter Tubular Motor 45mm 50Nm Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies 45mm 50Nm tubular motors in UAE for compatible rolling shutters, roller blinds, window shutters and motorised shading systems.

Supply and installation are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.