NICE WINGO5KIT Swing Gate Motor Kit UAE

The NICE WINGO5KIT Swing Gate Motor is a professional Italian automatic gate opener designed for double-leaf swing gates with leaves up to 3.5 metres per leaf. Equipped with two NICE WG5000 surface-mounted electromechanical actuators, the WINGO5KIT provides a powerful and reliable automation solution for residential, commercial and large villa swing gates.

The NICE WG5000 operates from a 230V AC 50Hz power supply and provides 200W power, up to 1700N force and an operating speed of approximately 0.013 m/s. The motor is engineered for reliable and quiet operation with a reduced number of internal moving components.

The WINGO5KIT uses the NICE MC800 control unit and supports automatic gate programming, automatic closing, pedestrian opening, safety photocells and compatible NICE radio controls.

Key Features

• Original NICE WINGO swing gate automation kit
• WINGO5KIT / WINGO5BDKCE
• 2 × NICE WG5000 swing gate motors
• Suitable for swing gate leaves up to 3.5 metres
• Surface-mounted electromechanical actuators
• 230V AC 50Hz power supply
• 200W motor power
• 1.5A absorption
• Maximum force 1700N
• Operating speed 0.013 m/s
• Up to 30 cycles per hour
• Reliable and quiet operation
• Built-in capacitor
• Pre-assembled opening travel stops
• Manual release with personalised NICE key
• Electrical connections accessible from above
• NICE MC800 control unit
• Automatic gate programming
• Pedestrian opening function
• Automatic closing function
• Automatic fault diagnostics
• IP44 protection rating
• Made in Italy

Technical Specifications

NICE WG5000 Automatic Swing Gate Motor

The NICE WG5000 is a surface-mounted electromechanical linear actuator designed for larger automatic swing gates. Two WG5000 motors are used in the NICE WINGO5KIT to automate conventional double-leaf swing gate entrances.

The actuator combines a slim linear design with strong 1700N force, making it suitable for larger residential and commercial swing gates where longer gate leaves require a robust automation system.

For Swing Gate Leaves Up to 3.5 Metres

The NICE WINGO5KIT is designed for compatible swing gate leaves measuring up to 3.5 metres per leaf.

Motor selection should also consider gate weight, construction, hinge condition, wind exposure, opening angle, mounting geometry and expected frequency of operation.

230V Automatic Swing Gate Motor

The NICE WG5000 operates from a 230V AC 50Hz power supply and provides approximately 200W motor power.

Its electromechanical construction provides dependable automatic operation for compatible residential and commercial swing gates.

1700N Maximum Force

The NICE WG5000 develops up to 1700N of force, providing strong linear movement for correctly installed swing gate leaves within the manufacturer's recommended application limits.

0.013 m/s Operating Speed

The WG5000 provides an operating speed of approximately 0.013 metres per second.

Actual gate opening and closing time depends on gate geometry, mounting dimensions, opening angle and controller settings.

Up to 30 Cycles Per Hour

The NICE WG5000 is rated for up to 30 operating cycles per hour, providing reliable performance for residential and suitable commercial swing gate applications.

Reliable & Quiet Operation

The NICE WINGO series uses a patented internal component layout with a reduced number of moving parts.

This design helps provide reliable and quiet automatic gate movement while maintaining a simple and durable mechanical system.

Built-In Capacitor

The NICE WG5000 incorporates a built-in capacitor, providing a clean actuator design and simplifying professional electrical installation.

Easy Electrical Installation

The WG5000 is designed so that electrical connections can be accessed from above after the actuator has been mechanically installed.

This helps simplify wiring, commissioning and future maintenance.

Pre-Assembled Opening Travel Stop

The NICE WG5000 features a pre-assembled mechanical travel stop for the opening direction.

Gate stops, actuator travel and opening geometry should be correctly adjusted during professional installation.

Manual Release During Power Failure

Each NICE WG5000 motor includes a convenient manual release system operated using a personalised NICE key and standard lock.

The release allows the swing gate to be manually operated during a power failure, emergency or maintenance.

NICE MC800 Control Unit

The WINGO5KIT uses the NICE MC800 control unit to manage both WG5000 swing gate actuators and compatible automation accessories.

The MC800 provides simple programming, automatic learning of gate travel, automatic fault diagnostics, pause-time programming, pedestrian opening and programmable maintenance warning.

Automatic Gate Closing

The NICE MC800 control system can be programmed to close the swing gate automatically after a selected pause time.

Appropriate photocells and safety devices should be correctly installed and tested before automatic closing is enabled.

Pedestrian Opening Function

The control system supports pedestrian opening, allowing partial operation of the automatic gate when full vehicle access is not required.

NICE EPM Photocell Sensors

The WINGO5KIT can include a pair of NICE EPM photocell sensors for obstacle detection across the automatic gate entrance.

The photocells provide an important safety input to the gate controller during automatic operation.

NICE Radio Remote Control

The NICE WINGO5KIT can be supplied with compatible NICE remote controls and radio receiver for convenient wireless operation of the automatic swing gate.

LED Flashing Warning Light

A compatible NICE LED flashing light can provide a visible warning while the automatic swing gate is opening or closing.

NICE WINGO5KIT Complete Kit Includes

• 2 × NICE WG5000 Swing Gate Motors
• 1 × NICE MC800 Control Unit
• 2 × Compatible NICE Remote Controls
• 1 × Pair NICE EPM Photocell Sensors
• 1 × Compatible NICE Radio Receiver
• 1 × NICE LED Flashing Light
• Motor Mounting Brackets
• 1 × Push Button

Access Control Integration

The NICE WINGO5KIT can be integrated with compatible external access control systems through the appropriate control-unit inputs.

• GSM gate openers
• WiFi gate controllers
• RFID access control systems
• Keypad access control
• UHF long-range vehicle readers
• Intercom systems
• Video intercom systems
• Push buttons
• Key switches

Residential & Commercial Applications

• Large villa swing gates
• Residential compound entrances
• Apartment buildings
• Commercial properties
• Office entrances
• Private parking entrances
• Large double-leaf swing gates
• Automatic vehicle entrances

Professional NICE WINGO5KIT Installation

Professional installation is recommended for the NICE WINGO5KIT. Both gate leaves should move smoothly by hand and the hinges should be correctly aligned and in good mechanical condition before motor installation.

Correct rear and front bracket positioning, actuator geometry, gate stops, electrical wiring, photocell positioning and MC800 programming are important for safe and reliable automatic gate operation.

NICE WINGO5KIT Swing Gate Motor Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies NICE WINGO5KIT swing gate motors in UAE for residential and commercial automatic swing gate applications.

Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.