NICE WINGO4KIT Swing Gate Motor Kit UAE

The NICE WINGO4KIT Swing Gate Motor is a reliable Italian automatic swing gate opener designed for residential and light commercial double-leaf gates. Equipped with two NICE WG4000 electromechanical actuators, the system is suitable for swing gate leaves up to 2 metres per leaf.

The NICE WG4000 operates from a 230V AC 50Hz power supply and delivers 200W power with up to 1500N force. Its surface-mounted linear design provides smooth, quiet and dependable automatic gate movement while maintaining a compact and professional appearance.

The complete WINGO4KIT includes two swing gate motors, an MC800 control unit, remote controls, photocell safety sensors, radio receiver, flashing light, mounting brackets and push button, providing a complete solution for automatic double swing gates.

Key Features

• Original NICE WINGO swing gate automation kit
• WINGO4KIT BD complete double gate kit
• 2 × NICE WG4000 swing gate actuators
• Suitable for gate leaves up to 2 metres
• Surface-mounted electromechanical design
• 230V AC 50Hz power supply
• 200W motor power
• 1500N maximum force
• Operating speed 0.016 m/s
• Up to 30 cycles per hour
• Reliable and quiet operation
• Reduced number of internal moving parts
• Built-in capacitor
• Pre-assembled opening travel stops
• Manual release with personalised NICE key
• Electrical connections accessible from above
• IP44 protection rating
• Made in Italy

Technical Specifications

NICE WG4000 Automatic Swing Gate Motor

The NICE WG4000 is a surface-mounted electromechanical actuator designed for automatic swing gates. Two WG4000 motors are supplied in the WINGO4KIT to automate a conventional double-leaf swing gate entrance.

Its compact linear actuator design makes the system particularly suitable for villas, private residences, apartment entrances and other properties requiring dependable automatic swing gate operation.

For Swing Gate Leaves Up to 2 Metres

The NICE WINGO4KIT is designed for compatible swing gate leaves measuring up to 2 metres per leaf.

Correct motor selection should also consider the gate weight, hinge condition, gate construction, wind exposure, opening angle and frequency of operation.

230V Automatic Swing Gate Opener

The NICE WG4000 operates from a 230V AC 50Hz power supply and provides approximately 200W of power.

The robust electromechanical system is designed to provide reliable everyday automatic gate operation for residential and light commercial entrances.

1500N Gate Motor Force

The WG4000 develops up to 1500N of force, providing dependable movement for correctly installed swing gate leaves within the manufacturer's recommended dimensions.

Reliable & Quiet Operation

The NICE WINGO series uses an efficient internal mechanical layout with a reduced number of moving components.

This design helps provide smooth, reliable and quiet automatic gate movement while reducing unnecessary mechanical complexity.

Easy Installation

The NICE WG4000 is designed to simplify professional installation. Once the actuator has been mechanically installed, its electrical connections can be conveniently accessed from above.

Correct positioning of the front and rear mounting brackets is essential for proper gate geometry, opening angle and actuator travel.

Built-In Capacitor

The WG4000 incorporates a built-in capacitor, helping provide a compact and organised actuator installation.

Pre-Assembled Opening Travel Stops

The NICE WINGO4KIT motors are supplied with pre-assembled travel stops for the opening direction.

The mechanical gate installation and required closing stop arrangement should be checked during installation according to the site configuration and manufacturer's instructions.

Manual Release System

Each NICE WG4000 actuator includes a convenient manual release system operated using a personalised NICE key and standard lock.

The manual release allows the swing gate to be operated manually during a power failure, emergency or maintenance.

NICE MC800 Control Unit

The WINGO4KIT uses the NICE MC800 control unit to manage the two swing gate actuators and connected automation accessories.

The MC800 provides automatic gate programming functions including automatic learning, pause-time programming, pedestrian opening and fault diagnostics.

Automatic Closing

The NICE control system can be programmed for automatic gate closing after a selected pause time.

When automatic closing is enabled, suitable photocells and other required safety devices should be correctly installed, configured and tested.

Pedestrian Opening Function

The control system supports a pedestrian opening function, allowing partial gate operation when full vehicle access is not required.

NICE EPM Photocell Safety Sensors

The complete WINGO4KIT can include a pair of NICE EPM photocell sensors for obstacle detection across the automatic gate entrance.

When the infrared photocell beam is interrupted, the controller responds according to the programmed safety logic.

NICE OXI Radio Receiver

A NICE OXI radio receiver can be installed in the control system for wireless gate operation using compatible NICE remote controls.

NICE ON2E Remote Controls

The complete WINGO4KIT can be supplied with two NICE ON2E remote controls for convenient wireless operation of the automatic swing gate.

Flashing Warning Light

A NICE flashing warning light can be connected to provide a visible indication while the automatic swing gate is opening or closing.

NICE WINGO4KIT Complete Kit Includes

• 2 × NICE WG4000 Swing Gate Motors
• 1 × NICE MC800 Control Unit
• 2 × NICE ON2E Remote Controls
• 1 × Pair NICE EPM Photocell Sensors
• 1 × NICE OXI Radio Receiver
• 1 × NICE Flashing Warning Light
• 2 × Motor Fixing Brackets
• 1 × Push Button

Access Control Integration

The NICE WINGO4KIT can be integrated with compatible external access control systems according to the installation requirements.

• GSM gate openers
• WiFi gate controllers
• RFID access control systems
• Keypad access control
• UHF long-range vehicle readers
• Intercom systems
• Push buttons
• Key switches

Residential & Commercial Applications

• Villa swing gates
• Residential entrances
• Townhouses
• Apartment buildings
• Private parking entrances
• Small commercial properties
• Office entrances
• Double-leaf automatic gates

Professional NICE WINGO4KIT Installation

Professional installation is recommended for the NICE WINGO4KIT. Before installing the motors, both swing gate leaves should move smoothly by hand and the hinges should be correctly aligned and in good mechanical condition.

The mounting geometry, brackets, gate stops, electrical wiring, photocell sensors and control-board settings should be correctly installed, programmed and tested before the automatic gate is placed into service.

NICE WINGO4KIT Swing Gate Motor Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies NICE WINGO4KIT swing gate motors in UAE for residential and light commercial automatic swing gate applications.

Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.