SOMFY DEXXO PRO 1000 RTS Control Board UAE

The SOMFY DEXXO PRO Control Board is a genuine replacement electronic control unit designed for compatible SOMFY DEXXO PRO RTS garage door openers, including suitable DEXXO PRO 1000 RTS installations.

The control board manages the garage door motor, travel programming, SOMFY RTS radio commands, obstacle detection, automatic closing, partial opening, lighting functions and compatible safety accessories.

It is an ideal replacement when the original DEXXO PRO control board has been damaged by electrical faults, power fluctuations, component failure or other electronic problems, provided the exact motor and board version are compatible.

Key Features

• Genuine SOMFY DEXXO PRO replacement control board
• Suitable for compatible DEXXO PRO RTS garage door openers
• Compatible with suitable DEXXO PRO 1000 RTS systems
• SOMFY RTS radio technology
• 433.42 MHz radio system
• Garage door travel programming
• Motor opening and closing control
• Soft start and soft stop management
• Obstacle detection management
• Automatic closing function
• Partial opening function
• Garage lighting control
• Compatible safety accessory inputs
• Remote control programming
• Suitable for professional replacement and repair

Technical Specifications

SOMFY DEXXO PRO Replacement Control Board

The SOMFY DEXXO PRO control board is the main electronic controller responsible for managing the automatic garage door opener.

It receives signals from remote controls and safety devices, controls motor movement and manages the programmed operating functions of the DEXXO PRO automation system.

Compatible with SOMFY DEXXO PRO 1000 RTS

This control board is intended for compatible SOMFY DEXXO PRO 1000 RTS garage door opener systems.

Because DEXXO PRO models and control boards can vary by generation and reference number, the original board code should always be checked before ordering a replacement.

SOMFY RTS 433.42 MHz Radio Control

Compatible DEXXO PRO RTS systems use SOMFY RTS radio technology operating at 433.42 MHz.

The control board can therefore manage compatible SOMFY RTS remote controls according to the programming procedure of the installed DEXXO system.

Garage Door Travel Programming

The control board manages the garage door opening and closing travel settings.

After replacement, the door travel and motor operating parameters should be correctly programmed before the garage door opener is returned to normal use.

Soft Start & Soft Stop

Compatible DEXXO PRO systems provide soft start and soft stop to reduce mechanical shock during automatic garage door movement.

These functions help protect the garage door, rail, motor and associated mechanical components during everyday operation.

Obstacle Detection

The SOMFY DEXXO PRO control system manages automatic obstacle detection during garage door operation.

If resistance or an obstruction is detected, the controller responds according to the programmed safety logic.

Automatic Closing

Compatible DEXXO PRO control systems support automatic garage door closing after a programmed delay.

Safety accessories should be correctly installed, programmed and tested before automatic closing is enabled.

Partial Opening Function

The DEXXO PRO system supports partial opening for ventilation or pedestrian access where the garage door configuration permits.

This function can be assigned to a compatible SOMFY RTS remote-control command.

Garage Lighting Control

The control board manages compatible garage lighting functions associated with the DEXXO PRO system.

Depending on the installed configuration, lighting can operate automatically with garage door movement and may also be controlled separately.

Backup Battery Compatibility

Compatible SOMFY DEXXO PRO systems can support an optional backup battery for limited operation during a mains power failure.

Battery compatibility should be confirmed against the exact DEXXO PRO motor and control-board version.

When Should the DEXXO Control Board Be Replaced?

A replacement control board may be required when the garage door motor has power but the electronic controller no longer operates correctly.

• Control board does not power up
• Motor does not respond to commands
• Remote controls cannot be programmed
• Garage door travel cannot be learned
• Outputs or accessory connections are damaged
• Board damaged by power fluctuation
• Burnt electronic components
• Water or moisture damage
• Intermittent or unstable control operation

Check the Board Reference Before Ordering

SOMFY has produced different DEXXO PRO versions and control-board generations. The replacement PCB should therefore be selected using the original control-board reference, motor model and connector layout.

Do not purchase a replacement board based only on the appearance of the PCB.

Programming After Control Board Replacement

After installing a replacement SOMFY DEXXO PRO control board, the garage door system normally requires programming and commissioning.

• Program garage door travel
• Set opening and closing positions
• Test obstacle detection
• Program SOMFY RTS remote controls
• Configure automatic closing if required
• Program partial opening if required
• Test photocells and safety accessories
• Check garage door balance and movement

Professional SOMFY Control Board Replacement

Professional replacement is recommended because the DEXXO control board is connected to mains power, the garage door motor and safety accessories.

The technician should confirm the cause of the original board failure before installing the replacement. A damaged motor, wiring fault or power-supply problem can damage a new PCB if the underlying fault is not corrected.

SOMFY DEXXO PRO Control Board Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies SOMFY DEXXO PRO control boards in UAE for compatible SOMFY garage door automation systems.

Supply, control-board replacement, programming, troubleshooting and garage door motor repair support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.