NICE RUN 2500 KG Sliding Gate Motor Kit UAE

The NICE RUN 2500 KG Sliding Gate Motor is a powerful heavy-duty automatic gate opener designed for large sliding gates weighing up to 2500 KG. Manufactured by NICE Italy, the RUN2500 is engineered for intensive-use commercial and industrial gate automation where strength, reliability and advanced electronic control are required.

Powered by a 230V AC 50Hz supply, the NICE RUN2500 delivers 870W power, maximum force of 1390N and a gate movement speed of approximately 0.17 m/s. With a working capacity of up to 42 cycles per hour, it is suitable for factories, warehouses, industrial compounds, logistics facilities and other heavy vehicle entrances.

The integrated RUA1 control unit, NICE BlueBUS technology, ventilated motor, adjustable acceleration and deceleration, advanced temperature management and Master/Slave function provide a professional automation solution for demanding sliding gate installations.

Key Features

• Original NICE heavy-duty sliding gate motor
• Model RUN2500 / RUN2500P
• Suitable for sliding gates up to 2500 KG
• Designed for intensive-use applications
• 230V AC 50Hz power supply
• 870W motor power
• 3.8A absorption
• Maximum force 1390N
• Gate speed up to 0.17 m/s
• Up to 42 cycles per hour
• Ventilated motor
• NICE BlueBUS technology
• Integrated RUA1 control unit
• Precise acceleration and deceleration adjustment
• Advanced temperature sensor
• Adaptive thermal protection
• Self-ventilation management
• Master / Slave synchronisation
• Silent gear motor mounted on bearings
• Manual emergency release
• IP44 protection rating
• Made in Italy

Technical Specifications

NICE RUN2500 Heavy-Duty Industrial Sliding Gate Motor

The NICE RUN2500 is engineered for large automatic sliding gates weighing up to 2500 KG. Its robust construction, ventilated motor and advanced electronic control make it particularly suitable for demanding commercial and industrial entrances.

2500 KG Sliding Gate Capacity

The NICE RUN 2500 is designed for compatible sliding gates weighing up to 2500 KG.

Gate weight should not be considered alone when selecting an industrial sliding gate motor. Gate length, wheel condition, track alignment, mechanical resistance, wind exposure and operating frequency should also be checked before installation.

230V 870W Industrial Gate Motor

The NICE RUN2500 operates from a 230V AC 50Hz power supply and provides approximately 870W power.

Its powerful electromechanical design is suitable for demanding heavy sliding gate automation where dependable operation is required.

1390N Maximum Gate Force

The NICE RUN 2500 provides a maximum force of approximately 1390N, delivering the strength required for correctly installed heavy industrial sliding gates.

0.17 m/s Sliding Gate Speed

The RUN2500 provides a gate movement speed of approximately 0.17 metres per second.

Actual opening and closing time depends on gate travel length, mechanical condition and programmed acceleration and deceleration settings.

Intensive Use – Up to 42 Cycles Per Hour

The NICE RUN2500 is rated for up to 42 cycles per hour, making it suitable for industrial and commercial entrances requiring frequent automatic gate operation.

Ventilated Motor

The RUN2500 incorporates a ventilated motor designed to help manage operating temperature during frequent gate cycles.

The ventilation system works together with the intelligent temperature management functions to support demanding automatic gate applications.

NICE BlueBUS Technology

The NICE RUN2500 features BlueBUS technology, allowing compatible control, safety and signalling accessories to communicate with the control unit through a simplified two-wire connection.

BlueBUS reduces wiring complexity and provides a flexible solution for professional industrial gate installations.

Up to 15 BlueBUS Devices

The BlueBUS system enables connection between the control unit and up to 15 compatible control, safety and signalling devices using a two-wire bus.

This provides flexibility for installations requiring multiple safety and automation accessories.

Integrated RUA1 Control Unit

The NICE RUN2500 incorporates the RUA1 electronic control unit inside the gate operator.

The controller manages motor movement, BlueBUS accessories, limit switches, radio commands, acceleration, deceleration and other programmable automation functions.

Precise Acceleration & Deceleration

The RUN2500 provides precise electronic adjustment of acceleration and deceleration during automatic gate movement.

Controlled slowing near the end of travel provides smoother stopping and helps reduce mechanical stress on the gate, gear rack and drive system.

Advanced Temperature Management

The NICE RUN 2500 incorporates an advanced temperature sensor that allows the controller to adapt motor force according to changing climatic and environmental conditions.

The system can also adapt thermal protection and self-ventilation intensity according to the detected operating temperature.

RUN2500 vs RUN2500P

The NICE RUN 2500 series is available with two different limit switch configurations.

• RUN2500: Electromechanical limit switch.
• RUN2500P: Inductive limit switch.

The correct version should be selected according to the installation and project requirements.

Master / Slave Synchronisation

The RUN2500 supports Master / Slave operation for automatic synchronisation of two compatible motors.

This function allows automation of special entrances with two opposing sliding gate leaves that need to operate together.

Silent Gear Motor on Bearings

The NICE RUN series uses a gear motor mounted on bearings to provide smooth and relatively quiet movement despite its heavy-duty industrial construction.

NICE EPMB BlueBUS Photocell Sensors

Compatible NICE EPMB BlueBUS photocells can be installed across the automatic gate entrance to provide obstacle detection and additional safety.

When the photocell beam is interrupted, the controller responds according to the programmed safety configuration.

NICE OXI Radio Receiver

A compatible NICE OXI plug-in radio receiver can be installed for wireless operation using suitable NICE remote controls.

NICE ON2E Remote Controls

The complete NICE RUN2500 kit can be supplied with NICE ON2E remote controls for convenient wireless opening and closing of the automatic sliding gate.

Manual Release During Power Failure

The NICE RUN2500 includes a manual release mechanism allowing the sliding gate to be disengaged from the motor during a power failure, emergency or maintenance.

After manual operation, the motor should be correctly re-engaged before returning the gate to automatic operation.

NICE RUN 2500 Complete Kit Includes

• 1 × NICE RUN2500 Sliding Gate Motor
• 1 × Integrated RUA1 Control Unit
• 2 × NICE ON2E Remote Controls
• 1 × Pair NICE EPMB BlueBUS Photocell Sensors
• 1 × NICE OXI Radio Receiver
• 1 × Flashing Warning Light
• 1 × Push Button

Access Control Integration

The NICE RUN2500 can be integrated with compatible access control and vehicle management systems according to project requirements.

• GSM gate openers
• RFID access control systems
• UHF long-range vehicle readers
• ANPR / LPR vehicle recognition systems
• Keypad access control
• Intercom systems
• Loop detectors
• Push buttons
• Key switches
• Compatible WiFi gate controllers

Industrial Sliding Gate Applications

• Factories
• Warehouses
• Industrial compounds
• Logistics centres
• Distribution centres
• Commercial buildings
• Business parks
• Staff parking entrances
• Large residential compounds
• Heavy villa sliding gates
• High-traffic vehicle entrances
• Opposing dual sliding gates

Professional NICE RUN2500 Installation

Professional installation is recommended for the NICE RUN2500. Before installation, the sliding gate should move smoothly and freely by hand without excessive mechanical resistance.

The motor foundation, gate track, wheels, gear rack, limit switches, BlueBUS photocells, electrical supply and controller settings should be correctly installed, programmed and tested.

NICE RUN 2500 Sliding Gate Motor Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies NICE RUN 2500 KG sliding gate motors in UAE for heavy-duty commercial and industrial automatic sliding gate applications.

Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.