NICE RUN 1800 KG Sliding Gate Motor Kit UAE

The NICE RUN 1800 KG Sliding Gate Motor is a heavy-duty industrial automatic gate opener designed for large sliding gates weighing up to 1800 KG. Manufactured by NICE Italy, the RUN1800 is engineered for intensive-use residential, commercial and industrial gate automation.

Powered by a 230V AC supply, the NICE RUN1800 delivers 700W power, up to 1110N force and a gate movement speed of approximately 0.17 m/s. With a rated capacity of up to 42 cycles per hour, it is suitable for factories, warehouses, commercial buildings, industrial compounds and busy vehicle entrances.

The RUN series features an integrated RUA1 control unit, NICE BlueBUS technology, adjustable acceleration and deceleration, advanced temperature management and Master/Slave synchronisation for demanding automatic sliding gate installations.

Key Features

• Original NICE industrial sliding gate motor
• Model RUN1800 / RUN1800P
• Suitable for sliding gates up to 1800 KG
• Designed for intensive-use applications
• 230V AC power supply
• 700W motor power
• 3A absorption
• Maximum force 1110N
• Gate speed up to 0.17 m/s
• Up to 42 cycles per hour
• Ventilated motor
• NICE BlueBUS technology
• Integrated RUA1 control unit
• Adjustable acceleration and deceleration
• Advanced temperature sensor
• Adaptive thermal protection
• Master / Slave synchronisation
• Silent gear motor mounted on bearings
• Manual emergency release
• IP44 protection rating
• Made in Italy

Technical Specifications

NICE RUN1800 Heavy-Duty Industrial Gate Motor

The NICE RUN1800 is engineered for large automatic sliding gates weighing up to 1800 KG. Its heavy-duty construction and intensive-use design make it particularly suitable for industrial and high-traffic vehicle entrances.

The motor, gearbox and electronic controller are integrated into a robust operator designed to provide dependable automatic gate movement in demanding installations.

1800 KG Sliding Gate Capacity

The NICE RUN 1800 is designed for compatible sliding gates weighing up to 1800 KG.

Correct motor selection should also consider gate length, wheel and track condition, mechanical resistance, wind exposure and the expected number of operating cycles.

230V 700W Industrial Gate Motor

The NICE RUN1800 operates from a 230V AC 50Hz power supply and has a rated power of approximately 700W.

Its heavy-duty electromechanical design is intended for demanding commercial and industrial sliding gate automation.

1110N Maximum Gate Force

The RUN1800 provides a maximum force of approximately 1110N, giving the operator the strength required to start and move correctly installed heavy sliding gates.

0.17 m/s Sliding Gate Speed

The NICE RUN1800 provides a gate movement speed of approximately 0.17 metres per second.

Actual opening and closing times depend on gate length, gate condition and programmed acceleration and deceleration settings.

Intensive Use – Up to 42 Cycles Per Hour

The RUN1800 is designed for intensive automatic gate applications and is rated for up to 42 cycles per hour.

This makes it suitable for busy commercial and industrial entrances requiring frequent vehicle access.

NICE BlueBUS Technology

The NICE RUN 1800 features BlueBUS technology, allowing compatible control, safety and signalling devices to communicate through a simplified two-wire connection.

The BlueBUS system can manage multiple compatible devices while reducing wiring complexity during installation.

Up to 15 BlueBUS Devices

The RUN control system supports connection of up to 15 compatible control, safety and signalling devices through the BlueBUS system.

This provides flexibility for industrial gate installations requiring multiple safety and access-control accessories.

Integrated RUA1 Control Unit

The NICE RUN1800 incorporates the RUA1 electronic control unit inside the operator.

The controller manages motor movement, BlueBUS accessories, limit switches, radio commands, acceleration, deceleration and other programmable gate functions.

Adjustable Acceleration & Deceleration

The RUN1800 provides precise electronic adjustment of acceleration and deceleration.

Controlled slowing near the end of the gate travel helps provide smoother opening and closing while reducing mechanical stress on the gate system.

Advanced Temperature Sensor

The NICE RUN1800 incorporates an advanced temperature sensor that allows the controller to adapt motor force according to changing environmental and climatic conditions.

The system can also manage thermal protection and self-ventilation according to the detected operating temperature.

Ventilated Motor for Intensive Operation

The RUN1800 uses a ventilated motor designed to manage heat during frequent automatic gate operation.

This feature makes the RUN series particularly suitable for intensive commercial and industrial applications.

RUN1800 vs RUN1800P Limit Switch

The NICE RUN 1800 is available in two main versions with different gate-position sensing systems.

• RUN1800: Electromechanical limit switch.
• RUN1800P: Inductive limit switch.

The correct version should be selected according to project and installation requirements.

Master / Slave Function

The RUN1800 supports Master / Slave synchronisation, allowing two compatible NICE RUN motors to operate together.

This function is particularly useful for entrances with two opposing sliding gate leaves requiring synchronised automatic movement.

Silent Gear Motor on Bearings

The NICE RUN series uses a gear motor mounted on bearings to provide smooth and relatively quiet operation despite its heavy-duty industrial construction.

NICE EPMB BlueBUS Photocell Sensors

Compatible NICE EPMB BlueBUS photocells can be connected to provide obstacle detection across the automatic gate entrance.

When the photocell beam is interrupted, the RUA1 control unit responds according to the programmed safety configuration.

NICE OXI Radio Receiver

A compatible NICE OXI plug-in receiver can be installed for wireless automatic gate operation using suitable NICE transmitters.

NICE ON2E Remote Controls

The complete kit can be supplied with NICE ON2E remote controls for convenient wireless opening and closing of the sliding gate.

Manual Release During Power Failure

The NICE RUN1800 includes a manual release system allowing the sliding gate to be disengaged from the motor during a power failure, emergency or maintenance.

After manual operation, the motor should be correctly re-engaged before returning the automatic gate to normal service.

NICE RUN 1800 Complete Kit Includes

• 1 × NICE RUN1800 Sliding Gate Motor
• 1 × Integrated RUA1 Control Unit
• 2 × NICE ON2E Remote Controls
• 1 × Pair NICE EPMB BlueBUS Photocell Sensors
• 1 × NICE OXI Radio Receiver
• 1 × Flashing Warning Light
• 1 × Push Button

Access Control Integration

The NICE RUN1800 can be integrated with compatible vehicle and pedestrian access-control systems according to project requirements.

• GSM gate openers
• RFID access control systems
• UHF long-range vehicle readers
• ANPR / LPR vehicle access systems
• Keypad access control
• Intercom systems
• Loop detectors
• Push buttons
• Key switches
• Compatible WiFi gate controllers

Industrial Sliding Gate Applications

• Factories and manufacturing plants
• Warehouses
• Industrial compounds
• Logistics centres
• Commercial buildings
• Business parks
• Staff parking entrances
• Residential compounds
• Large apartment entrances
• Heavy villa sliding gates
• High-traffic vehicle entrances
• Opposing dual sliding gates

Professional NICE RUN1800 Installation

Professional installation is recommended for the NICE RUN1800. Before installation, the sliding gate should move freely and smoothly by hand without excessive mechanical resistance.

The gate foundation, track, wheels, gear rack, limit switches, BlueBUS photocells, electrical supply and controller settings should be correctly installed, programmed and tested.

NICE RUN 1800 Sliding Gate Motor Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies NICE RUN 1800 KG sliding gate motors in UAE for heavy-duty commercial and industrial automatic gate applications.

Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.