Stainless Steel Exit Push Button UAE

The Stainless Steel Exit Push Button is a durable door release switch designed for access control systems, electric locks and controlled entrance doors. Featuring a strong stainless-steel panel and steel push button, it provides a simple and reliable method for releasing an electronically controlled door from inside the secured area.

With standard dimensions of 86 × 86 × 38 mm, the exit button is suitable for professional residential, commercial and industrial access control installations. It provides NC and COM output contacts with an electrical rating of up to 3A at 36V DC.

Designed for long-term operation, the push button has been tested for up to 1,000,000 mechanical operations, making it suitable for frequently used access-controlled doors.

Key Features

• Professional access control exit push button
• Stainless steel front panel
• Strong steel push button
• Standard 86 × 86 mm faceplate
• 38 mm overall depth
• NC / COM output contacts
• Maximum rating of 3A at 36V DC
• Up to 1,000,000 mechanical operations
• Simple push-to-exit operation
• Suitable for electric lock systems
• Suitable for RFID access control
• Suitable for keypad access systems
• Suitable for biometric access systems
• Suitable for residential and commercial doors
• Professional wall-mounted design

Technical Specifications

Stainless Steel Door Exit Button

The stainless steel exit button provides a convenient method for releasing an access-controlled door from inside a secured area.

When the button is pressed, its contact changes state and sends the required exit command to the compatible access controller, power supply or electric locking system.

86×86mm Standard Exit Button

The exit button features a standard 86 × 86 mm stainless steel faceplate with an overall depth of approximately 38 mm.

Its standard square format provides a clean and professional appearance for offices, residential buildings, commercial properties and other access-controlled entrances.

NC / COM Output Contact

The push button provides NC and COM contacts for connection to compatible access control systems.

The correct wiring method depends on the access controller, electric lock power supply and required door-release configuration.

3A 36V DC Maximum Rating

The exit button is rated for electrical loads of up to 3A at 36V DC.

The electrical rating of the connected equipment should always be checked before installation.

1 Million Operations Mechanical Life

The stainless steel push button has been tested for approximately 1,000,000 mechanical operations.

Its durable construction makes it suitable for access-controlled entrances where the exit button may be used frequently throughout the day.

Push to Exit Door Release

The exit button provides simple push-to-exit operation. Users inside the secured area press the button to request release of the connected access-controlled door.

This provides convenient exit without requiring an RFID card, PIN code or other credential from the secure side.

Electric Magnetic Lock Exit Button

The stainless steel exit button can form part of a compatible access control system using an electromagnetic door lock.

When the button is pressed, the access control system releases the magnetic lock according to the selected wiring and control configuration.

Electric Strike Lock Exit Button

The push button can also be used with compatible electric strike lock access control installations.

Pressing the exit button sends a release request to the controller or lock power supply, allowing the user to exit through the controlled door.

Electric Bolt Lock Integration

Compatible electric bolt lock systems can also use the stainless steel exit button as an internal door-release device.

Correct wiring should be selected according to the electric bolt, access controller and power supply being installed.

Electric Rim Lock Access Control

The exit push button can be incorporated into compatible electric rim lock installations where an internal release command is required.

The lock's voltage, current and control requirements should be checked before making a direct or controller-based connection.

RFID Access Control Exit Button

A typical RFID door access system uses an RFID reader or keypad on the entrance side and an exit push button on the secure side.

Authorised users present their RFID credential to enter, while users leaving the secured area simply press the exit button.

Fingerprint & Biometric Access Control

The stainless steel exit button can also be integrated with compatible fingerprint, facial recognition and biometric access control systems.

It provides a simple internal exit method independent of the authentication technology used for entry.

Standalone Access Control Systems

The exit button is suitable for use with compatible standalone RFID and keypad access controllers.

The button is connected to the controller's exit or request-to-exit input so the controller can activate the connected electric lock.

Network Access Control Systems

The push button can also form part of professional single-door and multi-door network access control systems.

It provides a physical request-to-exit signal for the access controller managing the corresponding door.

Complete Door Access Control System

A typical access control door installation may include:

• RFID, PIN or biometric access reader
• Access control controller
• Stainless steel exit push button
• Electromagnetic, strike, bolt or compatible electric lock
• Access control power supply
• RFID cards or key fobs
• Door contact where required
• Emergency release device where required
• Backup battery where required

Exit Push Button Applications

• Office entrance doors
• Residential buildings
• Apartment entrances
• Villa doors
• Commercial buildings
• Staff access doors
• Warehouse offices
• Factory entrances
• Schools
• Clinics
• Server rooms
• Storage rooms
• Restricted access areas
• Access-controlled doors

Professional Exit Button Installation

Professional installation is recommended to ensure the correct contact configuration and wiring are used with the access controller, power supply and electric lock.

After installation, the complete access control system should be tested to confirm reliable door release every time the exit button is pressed.

Stainless Steel Exit Push Button Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies stainless steel exit push buttons in UAE for residential, commercial and industrial access control systems.

Supply and professional installation are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.