NICE ROBUS 1000 KG Sliding Gate Motor Kit UAE
Price 1,950 AEDIn Stock
The NICE ROBUS 1000 KG Sliding Gate Motor is a powerful Italian automatic gate opener designed for residential, commercial and industrial sliding gates weighing up to 1000 KG. The NICE RB1000 combines 24V motor technology, intelligent electronic control and BlueBUS communication for smooth, reliable and professional automatic gate operation.
Powered from a 230V AC mains supply, the ROBUS 1000 delivers approximately 450W power, a maximum gate speed of 0.28 m/s and up to 900N force. With a rated working capacity of up to 50 cycles per hour, it is suitable for busy residential compounds, commercial entrances, warehouses and other high-use sliding gate applications.
The integrated RBA3 control unit, electromechanical limit switch, NICE BlueBUS technology, temperature sensor and Master/Slave synchronisation provide advanced control and installation flexibility.
Key Features
- Original NICE ROBUS sliding gate motor
- Model ROBUSKIT 1000 BD
- Motor code RB1000
- Suitable for sliding gates up to 1000 KG
- Made in Italy
- 24V motor technology
- 230V AC 50/60Hz mains supply
- 450W motor power
- Maximum gate speed 0.28 m/s
- Maximum force 900N
- Up to 50 cycles per hour
- NICE BlueBUS two-wire technology
- Integrated RBA3 control unit
- Electromechanical limit switch
- Built-in temperature sensor
- Master / Slave synchronisation
- Compatible with NICE EPMB BlueBUS photocells
- Compatible with NICE OXI radio receiver
- Manual release for emergency operation
- IP44 protection rating
Technical Specifications
| Brand | NICE |
| Series | ROBUS |
| Model | ROBUSKIT 1000 BD |
| Motor Code | RB1000 |
| Product Type | Automatic Sliding Gate Motor |
| Maximum Gate Weight | 1000 KG |
| Power Supply | 230V AC, 50/60Hz |
| Motor Voltage | 24V |
| Current Absorption | 2.3A |
| Motor Power | 450W |
| Opening Speed | 0.28 m/s |
| Maximum Force | 900N |
| Working Cycle | 50 Cycles / Hour |
| Limit Switch | Electromechanical |
| Control Unit | RBA3 Integrated |
| Communication | BlueBUS |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Dimensions | 330 × 210 × 303 mm |
| Weight | 13 KG |
| Country of Origin | Italy |
NICE RB1000 Heavy-Duty Sliding Gate Opener
The NICE RB1000 is designed for automatic sliding gates weighing up to 1000 KG. It provides a strong and dependable automation solution for larger residential, commercial and industrial vehicle entrances.
The operator combines a compact motor housing with an integrated control unit, simplifying installation while maintaining advanced electronic gate management.
1000 KG Sliding Gate Capacity
The NICE ROBUS 1000 is designed for compatible sliding gates weighing up to 1000 KG.
Gate weight should not be considered alone when selecting an automatic gate motor. Gate length, wheel condition, track alignment, mechanical resistance and operating frequency should also be checked.
24V Automatic Sliding Gate Motor
The ROBUS 1000 uses a 24V motor system powered through its integrated electronic controller from a 230V AC mains supply.
The low-voltage motor system allows precise electronic management of gate movement and safety functions.
450W Motor Power & 900N Force
The NICE RB1000 provides approximately 450W power and a maximum force of 900N.
This combination provides dependable movement for compatible heavy sliding gates weighing up to 1000 KG.
0.28 m/s Gate Speed
The NICE ROBUS 1000 provides an operating speed of approximately 0.28 metres per second.
Actual gate travel time depends on gate length, mechanical condition, installation and programmed settings.
50 Cycles Per Hour
The RB1000 is rated for up to 50 cycles per hour, making it suitable for properties requiring more frequent automatic gate operation.
NICE BlueBUS Technology
The ROBUS 1000 incorporates NICE BlueBUS technology, allowing compatible safety and control accessories to communicate with the control unit through a simplified two-wire connection.
The system can connect up to seven pairs of compatible photocells together with suitable control, safety and signalling devices using BlueBUS wiring.
Integrated RBA3 Control Unit
The NICE ROBUS 1000 incorporates the RBA3 electronic control unit inside the motor housing.
The controller manages motor movement, BlueBUS safety devices, radio receiver commands, limit switches and compatible gate automation accessories.
Temperature Sensor
The NICE RB1000 incorporates a temperature sensor that allows the control system to adapt motor power according to climatic conditions.
The same system also contributes to thermal protection of the motor during operation.
Master / Slave Synchronisation
The ROBUS 1000 supports Master / Slave operation, allowing two compatible motors to work together automatically.
This makes it possible to automate two opposite sliding gate leaves that must move in synchronised operation.
Electromechanical Limit Switch
The RB1000 uses an electromechanical limit switch to determine the fully open and fully closed positions of the automatic sliding gate.
Correct limit switch installation and adjustment are important for accurate and reliable stopping positions.
NICE EPMB BlueBUS Photocell Sensors
Compatible NICE EPMB BlueBUS photocell sensors can be connected to the ROBUS control system to provide obstacle detection across the automatic gate entrance.
When the photocell beam is interrupted, the control board responds according to the programmed safety logic.
NICE OXI Radio Receiver
The complete kit can include a NICE OXI plug-in radio receiver for wireless remote control operation.
The exact transmitter and radio receiver technology should always be checked when ordering additional or replacement remote controls.
Manual Release During Power Failure
The NICE ROBUS 1000 includes a manual release mechanism allowing the sliding gate to be disengaged from the motor during a power failure, emergency or maintenance.
Automatic Closing
The ROBUS control system supports programmable automatic closing. When enabled, the gate can close automatically after the programmed pause time.
Appropriate photocells and safety devices should be correctly installed and tested before automatic closing is enabled.
NICE ROBUS 1000 Complete Kit Includes
- 1 × NICE RB1000 Sliding Gate Motor
- 1 × Integrated RBA3 Control Unit
- 2 × NICE FLO2RE Remote Controls
- 1 × Pair NICE EPMB BlueBUS Photocell Sensors
- 1 × NICE OXI Radio Receiver
- 4 × 1 Metre Nylon Gear Racks
- 1 × Push Button
Access Control Integration
The NICE ROBUS 1000 can be integrated with compatible external access-control systems according to project requirements.
- GSM gate openers
- RFID access control systems
- Keypad access control
- UHF long-range vehicle readers
- Intercom systems
- Push buttons
- Key switches
- Compatible WiFi gate controllers
Residential, Commercial & Industrial Applications
- Large villa sliding gates
- Residential compounds
- Apartment entrances
- Commercial buildings
- Office entrances
- Warehouse gates
- Factory entrances
- Industrial properties
- Business parks
- Parking entrances
- Opposite dual sliding gates
- Automatic vehicle access gates
Professional NICE ROBUS 1000 Installation
Professional installation is recommended for the NICE ROBUS 1000. Before installation, the sliding gate should move smoothly and freely by hand without excessive mechanical resistance.
The gate track, wheels, foundation, gear rack, limit switches, BlueBUS photocells, electrical wiring and controller settings should all be correctly installed, programmed and tested.
NICE ROBUS 1000 Sliding Gate Motor Supplier in UAE
AAM Automatic Doors & Gate Barriers supplies NICE ROBUS 1000 KG sliding gate motors in UAE for heavy residential, commercial and industrial automatic sliding gate applications.
Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
