FAAC Sliding Gate Motor Nylon Rack 1 Metre UAE

The FAAC Sliding Gate Motor Nylon Rack is a durable Module 4 gear rack designed for compatible FAAC automatic sliding gate motor installations. The rack is mounted horizontally along the sliding gate and engages with the motor pinion to transfer motor movement to the gate during automatic opening and closing.

Manufactured from durable nylon with a reinforced steel core, the FAAC rack provides reliable engagement with the sliding gate motor pinion while helping maintain smooth and quiet gate operation.

Each rack section is approximately 1 metre long and can be installed in multiple sections according to the total travel length of the sliding gate.

Key Features

• FAAC sliding gate motor gear rack
• Heavy-duty nylon construction
• Reinforced steel core
• Module 4 gear profile
• 30 × 20 mm rack profile
• Approximately 1 metre per section
• Designed for compatible FAAC sliding gate motors
• Smooth engagement with motor pinion
• Suitable for new gate motor installations
• Suitable for replacement of damaged rack sections
• Multiple sections can be joined for longer gates
• Residential and compatible commercial applications

Technical Specifications

FAAC Module 4 Nylon Gear Rack with Steel Core for Sliding Gates

The FAAC nylon gear rack is an essential mechanical component of an automatic sliding gate system. It is fixed along the moving gate leaf and works directly with the drive pinion of the FAAC sliding gate motor.

As the motor pinion rotates, the teeth of the pinion engage with the Module 4 nylon rack and move the gate horizontally along its track.

Module 4 Sliding Gate Gear Rack

The FAAC nylon rack uses a Module 4 gear profile. The rack module must match the drive pinion fitted to the sliding gate motor for correct engagement and reliable operation.

Always check the existing motor pinion and rack specification before replacing a damaged rack.

Nylon Rack with Steel Core

The rack combines a durable nylon exterior with internal steel reinforcement. This construction provides the smooth operating characteristics of a nylon rack together with additional mechanical strength.

The reinforced construction makes it suitable for compatible automatic sliding gate installations where reliable rack-to-pinion engagement is required.

1 Metre Sliding Gate Rack

Each FAAC nylon rack section is approximately 1 metre long. Multiple rack sections can be installed continuously along the gate according to the required gate travel.

For example, a typical installation requiring approximately four metres of rack can use four 1-metre sections.

Compatible with FAAC Sliding Gate Motors

The nylon rack is designed for compatible FAAC automatic sliding gate operators using the appropriate Module 4 drive pinion.

Compatibility should always be confirmed according to the exact FAAC motor model, pinion size, gate weight and installation requirements.

FAAC 740 & 741 Sliding Gate Motor Rack

FAAC 740 and FAAC 741 sliding gate operators use a Z16 Module 4 drive pinion. Compatible Module 4 rack can therefore be used as part of correctly configured FAAC 740 and 741 sliding gate installations.

Smooth & Quiet Gate Operation

A correctly installed nylon rack provides smooth engagement between the rack teeth and motor pinion, helping reduce unnecessary vibration and noise during automatic gate movement.

The rack must remain correctly aligned with the motor pinion throughout the complete opening and closing travel.

Correct Rack & Pinion Installation

Correct spacing between the rack and motor pinion is important. The rack should engage properly with the pinion without placing the full weight of the gate onto the motor gearbox.

The gate itself must remain supported by its wheels and track. Incorrect rack height or excessive pressure against the pinion can cause noise, premature wear and motor gearbox damage.

Replacement FAAC Nylon Rack

The FAAC nylon rack can be used to replace compatible worn, cracked or damaged sliding gate rack sections.

Damaged or missing teeth can cause jerking, slipping, unusual noise or loss of drive between the motor and gate. Damaged sections should be replaced and correctly aligned with the existing rack.

Applications

• FAAC automatic sliding gates
• Villa sliding gates
• Residential driveway gates
• Apartment entrance gates
• Residential compounds
• Commercial sliding gates
• Automatic vehicle entrances
• New sliding gate motor installations
• Replacement of damaged gate racks

Check Compatibility Before Ordering

Before purchasing a FAAC sliding gate motor nylon rack, check the existing rack dimensions, gear module, motor pinion and gate automation model.

The rack and motor pinion must have compatible tooth profiles for smooth and reliable automatic gate operation.

FAAC Sliding Gate Motor Nylon Rack Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies FAAC sliding gate motor nylon racks in UAE for compatible automatic sliding gate installations.

Supply, replacement and professional installation are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.