BFT DESME A15 P111526 Photocell Safety Sensor

The BFT DESME A15 P111526 Photocell Sensors are a pair of self-aligning safety photocells designed for automatic gates and access automation systems. The transmitter and receiver create an infrared safety beam to detect vehicles, people and other obstacles within the gate movement area.

Operating from a 24V AC/DC power supply, the BFT DESME A15 provides a maximum detection range of up to 30 metres. The photocells feature an IP55 protection rating, making them suitable for external gate automation installations.

When the infrared beam between the transmitter and receiver is interrupted, the photocell sends a signal to the compatible gate control board. The automation system can then respond according to its programmed safety logic, such as stopping or reversing the gate movement.

The BFT DESME A15 is suitable for sliding gates, swing gates, parking barriers and other compatible automatic entrance systems requiring reliable photocell safety protection.

Key Features

• Original BFT photocell safety sensor
• Model DESME A15
• Product code P111526
• Supplied as transmitter and receiver pair
• Self-aligning photocell design
• Maximum operating range up to 30 metres
• 24V AC/DC power supply
• IP55 protection rating
• Outdoor installation suitable
• Infrared obstacle detection
• 30V / 1A contact capacity
• Operating temperature -20°C to +55°C
• Suitable for automatic gate safety systems
• Suitable for residential and commercial installations

Technical Specifications

BFT 24V Self-Aligning Safety Photocells for Automatic Gates

The BFT DESME A15 consists of a transmitter and receiver installed opposite each other across the gate entrance. The units create an infrared beam across the vehicle or pedestrian passage.

The self-aligning design provides a practical solution for automatic gate safety installations where reliable beam detection is required.

30 Metre Photocell Detection Range

The DESME A15 provides an operating range of up to 30 metres, allowing the photocells to be installed across wide residential, commercial and industrial entrances.

Actual detection range can be reduced by environmental conditions such as heavy rain or fog.

Automatic Gate Obstacle Detection

When a vehicle, person or other obstacle interrupts the infrared beam, the photocell output changes and sends a safety signal to the connected automatic gate control board.

The exact gate response depends on the control board configuration and may include preventing closing, stopping movement or reversing the gate.

IP55 Outdoor Protection

The BFT DESME A15 has an IP55 protection rating and an operating temperature range from -20°C to +55°C, making it suitable for external automatic gate installations.

BFT Photocell for Sliding Gate Motors

The DESME A15 can be installed with compatible BFT sliding gate automation systems to help detect obstacles in the gate entrance during automatic operation.

It is suitable for residential villas, apartment buildings, commercial properties, factories and other automatic sliding gate installations.

BFT Photocell for Swing Gate Motors

The photocell pair can also be integrated with compatible BFT swing gate motors. Correct photocell positioning helps protect the entrance area while the swing gate leaves are operating.

BFT Photocell for Parking Gate Barriers

The BFT DESME A15 can be used with compatible parking gate barrier control systems to detect vehicles crossing the infrared safety beam.

The photocell can form part of the parking barrier safety system together with loop detectors and other compatible vehicle detection devices.

Replacement BFT Gate Photocell Sensor

The BFT DESME A15 P111526 is suitable for new automatic gate installations or as a replacement for compatible damaged or faulty photocell sensors.

Before replacement, check the existing photocell voltage, control board wiring and safety input configuration to confirm compatibility.

Applications

• Automatic sliding gates
• Automatic swing gates
• Parking gate barriers
• Residential villa entrances
• Apartment building gates
• Commercial entrances
• Office parking areas
• Factories and warehouses
• Vehicle access control systems
• Gate automation safety systems

BFT DESME A15 Photocell Sensor Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies BFT DESME A15 P111526 photocell sensors in UAE together with BFT sliding gate motors, swing gate motors, parking barriers, remote controls, control boards, flashing lights and gate automation spare parts.

Supply, installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.