Roller Swing Gate Opener 600 KG UAE

The Roller Swing Gate Opener 600 KG is a powerful wheel-drive automation system designed for heavy and large swing gates that use ground-support wheels or rollers. Unlike conventional linear swing gate operators, the motor drives the gate through a powered wheel, making it an excellent solution for gates where traditional arm-type motors are difficult to install.

Designed for gates weighing up to 600 KG, this automatic roller swing gate motor provides smooth and controlled gate movement with soft start and soft stop, obstacle detection, auto-reverse safety, automatic closing and manual release.

The wheel-supported design makes this gate opener suitable for villas, warehouses, factories, commercial properties and other large entrances throughout the UAE.

Key Features

• Automatic roller swing gate opener
• Suitable for gates up to 600 KG
• Wheel-drive swing gate automation
• Designed for wheel-supported swing gates
• Suitable for heavy and large gates
• Soft start operation
• Soft stop operation
• Obstacle detection
• Automatic reverse safety function
• Open / Stop / Close control
• Automatic closing function
• Single-gate operation support
• Manual release for emergency operation
• Compatible with photocell safety sensors
• Compatible with flashing warning lights
• Remote control operation
• Suitable for residential applications
• Suitable for commercial applications
• Suitable for industrial gates

Technical Specifications

600 KG Roller Swing Gate Motor

The 600 KG roller swing gate motor is designed for large swing gates where the gate leaf is supported by a wheel or roller at ground level.

Supporting the gate weight through the wheel helps reduce the mechanical load placed on the gate hinges, making this type of automation particularly useful for large or heavy gate leaves.

Wheel Drive Swing Gate Automation

Instead of pushing or pulling the gate from a fixed actuator mounted near the hinge, the roller swing gate opener uses a motorized drive wheel to move the gate across the ground.

As the wheel rotates, it moves the swing gate through its opening or closing cycle.

Ideal for Heavy Swing Gates

Wheel-supported gate automation can be an excellent solution for heavy swing gates because a significant portion of the gate weight is supported at ground level.

This makes the system suitable for large residential, commercial and industrial gates where conventional swing gate actuators may not be the preferred installation method.

Soft Start & Soft Stop

The roller swing gate opener provides soft start and soft stop functions for smoother gate movement.

Gradual acceleration and deceleration help reduce sudden mechanical shock during opening and closing, contributing to smoother operation and reduced stress on the gate structure.

Obstacle Detection

The gate automation system includes an obstacle detection function designed to improve operational safety.

The system should always be correctly adjusted and used together with appropriate external safety devices according to the installation requirements.

Automatic Reverse Safety

The auto-reverse function allows the control system to respond when an obstacle is detected during gate movement.

Correct commissioning and safety testing are important after installation to ensure the gate responds appropriately.

Open / Stop / Close Control

The automatic roller swing gate opener supports convenient Open / Stop / Close operation.

The gate can be controlled using compatible remote controls, push buttons or other access control devices connected to the gate controller.

Automatic Closing Function

An automatic closing function can be used to close the gate automatically after a programmed waiting period.

When automatic closing is enabled, appropriate photocell safety sensors should be installed and correctly tested.

Single-Leaf Gate Operation

The system supports single-leaf gate operation, making it suitable for entrances where only one swing gate leaf requires automation.

The correct configuration should be selected during controller programming according to the gate installation.

Double Swing Gate Automation

For double-leaf entrances, a roller motor can be installed on each compatible gate leaf to create a complete automatic double swing gate system.

The control system can coordinate the opening and closing sequence of both gate leaves according to the installation configuration.

Manual Release During Power Failure

The manual release system allows the gate to be operated manually during a power failure, emergency or maintenance.

After releasing the motor, the gate can be moved manually provided the gate structure, wheel and hinges are correctly maintained.

Photocell Safety Sensors

Compatible photocell safety sensors can be installed across the gate entrance to detect vehicles, pedestrians and other obstacles.

Photocells are especially recommended when automatic closing is enabled and should be correctly positioned and tested during commissioning.

Flashing Warning Light

A compatible flashing warning light can be connected to provide a visible indication when the automatic gate is operating.

This provides additional awareness for vehicles and pedestrians around the gate entrance.

Remote Control Operation

Compatible wireless remote controls can be used for convenient opening and closing of the roller swing gate.

Additional transmitters can be programmed according to the capacity and configuration of the installed radio receiver.

Push Button Control

A wired push button can be connected to provide gate operation from a guard room, reception area, security office or other convenient location.

Depending on the controller configuration, the push button can provide the required gate command through the appropriate control input.

Access Control Integration

The roller swing gate opener can be integrated with compatible access control and smart gate systems.

• RFID access control readers
• Keypad access control
• GSM gate openers
• WiFi smart gate controllers
• UHF long-range vehicle readers
• Intercom systems
• Video intercom systems
• Push buttons
• Key switches

Roller Swing Gate Motor for Villas

The 600 KG roller swing gate opener is suitable for large villa entrances where the gate uses a supporting wheel.

It provides convenient remote-controlled access while maintaining the traditional appearance and opening movement of a swing gate.

Industrial Roller Swing Gate Opener

Wheel-drive swing gate automation is also suitable for compatible industrial entrances, warehouses, factories and commercial compounds with large gate leaves.

The gate size, weight, wheel condition, surface condition and daily operating frequency should be considered when selecting the correct automation system.

Suitable Applications

• Villa swing gates
• Heavy swing gates
• Wheel-supported gates
• Large residential gates
• Commercial entrances
• Warehouse gates
• Factory gates
• Industrial compounds
• Logistics centres
• Residential compounds
• Access-controlled entrances

Professional Roller Swing Gate Motor Installation

Professional installation is recommended for roller swing gate automation because correct wheel contact, gate alignment, hinge condition and ground surface are essential for reliable operation.

Before installation, the gate should move smoothly and the supporting wheel should maintain proper contact with the driving surface throughout the complete opening and closing movement.

Roller Swing Gate Opener Supplier in UAE

AAM Automatic Doors & Gate Barriers supplies 600 KG roller swing gate openers in UAE for residential, commercial and industrial gate automation applications.

Supply, professional installation, programming, maintenance, repair and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.