BFT MITTO COOL C2 Remote Control 2-Channel UAE
Price 50 AEDIn Stock
The BFT MITTO COOL C2 Remote Control is a compact 2-channel transmitter designed for convenient control of compatible BFT gate automation, parking barrier and garage door systems. Operating at 433 MHz, the MITTO COOL C2 provides reliable wireless control for residential, commercial and professional automatic access systems.
The remote features 2 programmable buttons, allowing compatible automation commands to be controlled from a single transmitter. With an operating range of approximately 50 to 100 metres, the BFT MITTO COOL C2 provides convenient gate and barrier operation from inside a vehicle or around the property.
Powered by a single 3V CR2032 battery, the MITTO COOL C2 combines low power consumption with a compact and lightweight design. The transmitter weighs approximately 20 grams and features a distinctive blue housing for easy identification.
The BFT MITTO COOL C2 is suitable as an additional or replacement remote control for compatible BFT automation systems. It is ideal for villas, residential buildings, commercial properties, parking facilities and automatic vehicle entrances throughout the UAE.
Key Features
- Original BFT remote control transmitter
- Model MITTO COOL C2
- Product code D112306
- International code 2614118
- 2-channel remote control
- 2 programmable buttons
- 433 MHz operating frequency
- Operating range approximately 50–100 metres
- 3V power supply
- 1 × CR2032 battery
- Compact and lightweight design
- Approximately 20 g weight
- Blue colour housing
- Suitable for compatible BFT automation systems
- Ideal as an additional or replacement BFT remote
Technical Specifications
| Brand | BFT |
| Model | MITTO COOL C2 |
| Product Code | D112306 |
| International Code | 2614118 |
| Product Type | Remote Control Transmitter |
| Number of Channels | 2 |
| Number of Buttons | 2 |
| Frequency | 433 MHz |
| Operating Range | 50–100 m |
| Power Supply | 3V |
| Battery Type | CR2032 |
| Number of Batteries | 1 |
| Weight | 20 g |
| Colour | Blue |
| Interconnectivity | No |
2-Channel BFT Remote Control
The BFT MITTO COOL C2 features two control channels with 2 programmable buttons. Depending on the connected BFT receiver and system configuration, the buttons can be programmed to operate compatible automatic gate, garage door or parking barrier functions.
The two-channel configuration makes the MITTO COOL C2 particularly useful for properties with more than one compatible BFT automation system.
433 MHz Radio Transmitter
The BFT MITTO COOL C2 operates on the 433 MHz radio frequency and is designed for use with compatible BFT radio receiving systems.
Before purchasing a replacement remote, the existing BFT receiver and automation system should be checked to confirm compatibility with the MITTO COOL C2.
50–100 Meter Operating Range
The BFT MITTO COOL C2 provides a nominal operating range of approximately 50 to 100 metres, allowing convenient operation of compatible automatic gates, barriers and garage doors.
Actual transmission range may vary depending on the receiver installation, surrounding buildings, interference, obstacles and environmental conditions.
CR2032 3V Battery Powered
The MITTO COOL C2 is powered by a single 3V CR2032 battery. The commonly available coin-cell battery can be replaced when the transmitter range becomes reduced or the remote stops transmitting reliably.
Compatible BFT Automation Systems
The BFT MITTO COOL C2 is designed for compatible BFT radio receiving systems and can be used with various BFT automation applications when the correct compatible receiver is installed.
- BFT sliding gate motors
- BFT swing gate motors
- BFT parking gate barriers
- BFT garage door openers
- BFT automatic vehicle entrances
- Compatible BFT radio receiver systems
BFT MITTO COOL C2 Programming
The BFT MITTO COOL C2 must be programmed to a compatible BFT receiver or control system before it can operate the automation. Programming procedures can vary depending on the receiver and control board installed.
For correct programming, identify the BFT control board or radio receiver model before adding the new transmitter. Existing receiver settings should not be changed unless required during programming.
Applications
- Automatic sliding gates
- Automatic swing gates
- Parking gate barriers
- Sectional garage doors
- Villa entrance gates
- Residential buildings
- Commercial properties
- Office parking entrances
- Industrial gate automation
- Vehicle access control systems
BFT MITTO COOL C2 Supplier in UAE
AAM Automatic Doors & Gate Barriers supplies BFT MITTO COOL C2 remote controls in UAE together with compatible BFT gate motors, parking barriers, garage door openers, radio receivers, control boards and automation spare parts.
Supply, programming assistance and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
